40 gallon natural gas hot water heater with power vent

*FREE, next-day delivery on most orders to most areas.

© 2008 - 2022. HDS IP Holding, LLC.
All Rights Reserved. Any reproduction of this website in whole or part, or any unauthorized use without express permission by HDS IP Holding, LLC is prohibited by and will constitute a violation of the copyright laws of the United States. HD Supply® and the HD Supply logo are trademarks of HDS IP Holding, LLC.

Home » Products » Gas » 6 40 UBVIT - 40 Gallon Power Vent Ultra-Low NOx Natural Gas Water Heater - 6 Year Warranty

Features
Specs
Support & Resources

Product Features

6-year limited tank & parts warranty, 1-year labor warranty
42,000 BTU input for faster recovery
Sidewall venting up to 80 feet
Vents using inexpensive schedule 40 PVC, CPVC, or ABS pipe
More powerful modular blower with 110/120 volt electrical system, factory-installed 7-foot power cord
Advanced Intelli-Vent®* gas control valve — no standing pilot saves energy
Glass-lined tank with heavy duty anode rod protects against corrosion
“Environmentally-Friendly” Non-CFC foam insulation
Eco-Friendly Green Choice® gas burner — reduces NOx emissions by 33%
Factory-installed PEX polymer lined heat trap nipples
Factory-installed temperature & pressure (T&P) relief valve
Complies with Ultra-Low NOx requirements in California of less than 10 ng/J NOx Emissions

Tech Specs

Nominal Capacity:
?Nominal capacity is the representative number pursuant to the safety standard certification process for water heaters
40
Rated Storage Volume:
?Rated Storage Volume = Rated storage volume is the measured storage volume defined by the Department of Energy.
38
UEF: 0.70
Family Size: 5
ENERGY STAR® Qualified: Yes
Self Cleaning: Yes
Limited Warranty Tank: 6
Limited Warranty Parts: 6
Limited Warranty Labor: 1
Max BTUs Input: 42,000
Emissions: Ultra-Low Nox
Ignition Type: Electronic
Foam Insulation: Yes
Water Connection Location: Top
Water Connection Size: 3/4
UPC: 91193003121
First Hour Rating (Gallons): 76

Dimensions

Height: 58 5/8"
Height w/Draft Hood (inches): 66 7/8"
Diameter: 20"
Width: 20"
Depth: 20"
Product Weight: 153lbs/69kglbs.
Shipping Weight: 170lbs/77kglbs.
Vent Size: 2 or 3"

Accessories

Gas Water Heater Installation Kit

ETC-2X Expansion Tank

ProLine® XE Power Vent 40-Gallon Gas Water Heater

Model # GS6-40-YBVIS

WHERE TO BUY

, 31205

Enter your city and state or zip code to find a local installer.

Product Description

The ProLine® XE Power Vent gas water heater is engineered to maximize efficiency, while offering greater flexibility in installation options.

Featuring a 40-gallon (nominal) tank and a 40,000 BTU gas burner, the GS6 40 YBVIS Power Vent delivers a first hour rating of 73 gallons and a recovery rate of 44.67 gallons per hour. With an 0.67 Uniform Energy Factor, this water heater is ENERGY STAR® qualified. It carries a 6-year limited warranty, and meets Low NOx emission requirements.

Where to Buy

Showing results for 31205

Enter your city and state or zip code below to find a local installer.

Find Hide Search

Certifications

0.67

Uniform Energy Factor

Product Specificationsadd

Nominal Capacity:
?Nominal Capacity is a representative number provided by a manufacturer for comparison purposes. The actual rated storage volume of our water heaters may be found on the product details page on our website.
40
Rated Storage Volume
?Rated Storage Volume is the measured storage volume defined by the Department of Energy.
38
UEF 0.67
Recovery Gallons: 45
Maximum BTUs: 40,000
Power Source: Natural Gas
Limited Tank Warranty: 6 Years
Limited Parts Warranty: 6 Years
Anode: Sacrificial Anode
T&P Relief Valve: Yes
Pilot Reset Button: Yes
Ignition Type: Electronic
Water Connection Location: Top
Water Connection Size: 3/4"
Emissions: Low NOx
ENERGY STAR®: Yes
LEED Points: 1
FVIR Certified: Yes
First Hour Rating: 73

Dimensions & Ventingadd

Type: Short
Height: 49 5/8"
Height w/Draft Hood: 59"
Diameter: 22"
Width: 22"
Depth: 22"
Vent Type: Power Vent

Product Features & Optionsadd

3-Position Rotatable Blower Outlet

Our exclusive 3-position rotatable blower outlet adds flexibility for an easy installation.

CoreGard™ Anode Rod

Our anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods.

Brass Drain Valve

• Solid brass, tamper resistant, enhanced-flow, ball type, valve.

• Uses a standard female hose fitting that allows for fast and easy draining during maintenance.

• Screwdriver slot features a 1/4 turn radius, for straight-through water flow and a quick and positive shut off.

T&P Relief Valve

Top-mounted T&P relief valve available as an option.

How long would you like to enjoy a shower?

Macon, Georgia 31205

Change Location or Advanced Settings

minutes

SingleShower Length

$ Dollars

Estimated Energy Cost

Many factors affect the actual performance of a water heater. This represents our closest approximation of your likely experience with this water heater in Macon, Georgia, but actual performance may vary depending on factors beyond our ability to control or estimate. To view or adjust our assumptions of the most common factors that impact this product’s performance in Macon, Georgia, please view the advanced settings. *Annual Estimated energy costs are estimated calculated from the energy efficiency of each water heater, your household’s estimated hot water usage & set temperature, the average groundwater temperature for your location, and residential energy prices for your location as reported by the Department of Energy and the Energy Information Administration.

Product Features & Options

3-Position Rotatable Blower Outlet

Our exclusive 3-position rotatable blower outlet adds flexibility for an easy installation.

CoreGard™ Anode Rod

Our anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods.

Brass Drain Valve

• Solid brass, tamper resistant, enhanced-flow, ball type, valve.

• Uses a standard female hose fitting that allows for fast and easy draining during maintenance.

• Screwdriver slot features a 1/4 turn radius, for straight-through water flow and a quick and positive shut off.

T&P Relief Valve

Top-mounted T&P relief valve available as an option.

Technical Specifications
Dimensions & Venting

Nominal Capacity: ?Nominal Capacity is a representative number provided by a manufacturer for comparison purposes. The actual rated storage volume of our water heaters may be found on the product details page on our website.	40
Rated Storage Volume ?Rated Storage Volume is the measured storage volume defined by the Department of Energy.	38
UEF	0.67
Recovery Gallons:	45
Maximum BTUs:	40,000
Power Source:	Natural Gas
Limited Tank Warranty:	6 Years
Limited Parts Warranty:	6 Years
Anode:	Sacrificial Anode
T&P Relief Valve:	Yes
Pilot Reset Button:	Yes
Ignition Type:	Electronic
Water Connection Location:	Top
Water Connection Size:	3/4"
Emissions:	Low NOx
ENERGY STAR®:	Yes
LEED Points:	1
FVIR Certified:	Yes
First Hour Rating:	73

Type:	Short
Height:	49 5/8"
Height w/Draft Hood:	59"
Diameter:	22"
Width:	22"
Depth:	22"
Vent Type:	Power Vent

Certifications

0.67

Uniform Energy Factor

A. O. Smith water heaters are available through your local plumbing professional.

Literature

Is a power vent water heater worth it?

A power vent water heater also offers more energy efficiency when compared to a direct vent water heater. By utilizing a fan to operate the power vent, your water heater will require less gas to operate, which means it will require less energy to operate, and it will cost less to operate.

Why are power vent water heaters more expensive?

Cost: Because of the added fan/blower, power vent water heaters typically cost significantly more than their direct vent counterparts. You must also be mindful of additional costs that may arise, like the electricity to run the blower and/or additional piping you may require.

Do I need a power vent gas water heater?

Power direct vents are used when the space in which you are installing a water heater lacks sufficient air for combustion and requires flexibility around the installation. Consult a professional plumbing contractor to make sure that you need power direct venting before going down this installation path.