Details
Details
INTRODUCING The JHM B8/C7 Performance Multi-Pass Heat Exchanger Kit!
If you want a BLACK exchanger core and NOT raw aluminum (SILVER) please visit that product page.
When upgrading your Audi 3.0T or 4.0T, keeping the IATs down is a must for optimal performance. Our JHM Performance Multi-Pass Heat Exchanger Kit is designed to significantly reduce your air intake temperatures using the tried and true, Dual-Core with Quad-Pass design. Installation of our HX kit is now easier than ever, without the need of removing the crash bar to drill holes for bracket mounting. Our one-piece easy install bracket allows you to set the core in place, center it, and run the provided self-drilling bolts into the crash bar. Mounting the heat exchanger to the crash bar takes less than 5 minutes! All installation fittings, hose, clamps, and bolts included.
CUSTOMER DIY: CLICK HERE
Features:
• Efficient Dual-Core, Quad-Pass design
• One Piece Easy Install Stainless Steel Bracket
• Bleeder and Drain Plug on the top and bottom of the core
• High Fin Density Core
• Lightweight Construction
• All Installation Hardware Included
NOTE: May be a tight fit for S7 WITH Night Vision Camera
CUSTOMER PHOTO:
For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.
This product fits the following vehicles:
Audi | S4 | B8-B8.5 (2010-2016) | 3.0t V6 24v SC |
Audi | S5 | B8-B8.5 (2008-2017) | 3.0t V6 24v SC |
Audi | A6 | C7 (2012-Present) | 3.0t V6 24v SC |
Audi | A7 | C7 (2012-Present) | 3.0t V6 24v SC |
Audi | Q5 | B8 (2009-Present) | 3.0t V6 24v SC |
Audi | SQ5 | B8 (2014-Present) | 3.0t V6 24v SC |
Audi | S6 | C7-C7.5 (2013-Present) | 4.0t V8 32v |
Audi | S7 | C7-C7.5 (2013-Present) | 4.0t V8 32v |
Reviews
Customer Reviews (1)
Necessary for Higher HP Builds Installed on my B8 S4 for stage 3 tune, works great. Already installed another on my C7 S6 as a prerequisite for upgraded turbos. Lowers IATs and is priced better than other brands. The real plus is the bracket is already installed! (Posted on 8/11/2020)Off-road Use
Prop 65
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov
Q and A
You must be logged in to ask questions.
Product Questions
Description
CTS B8/B8.5 Audi S4/S5 Air-to-Water Heat Exchanger (Intercooler) Upgrade
Avoid heatsoak by replacing the small factory cooler; this is a must for any modified V6 supercharged S4/S5/Q5/SQ5 3.0TFSI. Keep your air temperature low with our premium AWIC upgrade kit.
Strongly recommended to be used on stage 2 and up tuned vehicles. Air intake temps are reduced by 10F-12F.
Features:
- Efficient lightweight construction
- Triple-pass core. No additional coolant pump required
- Designed using the latest 3D scanning technology
- Complete replacement for restrictive factory part
- Reduces intake air temperature
- Reduces coolant temperatures
- Helps Maintains consistent power in extreme conditions
- Drain plug and bleed screw to ensure no air is trapped while adding coolant
- Easy installation, perfect fit
Kit Includes:
- Heat Exchanger (24″ x 17″ x 2.5″)
- Brackets & Hardware
- Coolant Hose
- Hose Connectors
- Hose Clamps
Fitment:
- 2010-2016 Audi S4 (V6T supercharged)
- 2010-2017 Audi S5 (V6T supercharged)
- 2013-2017 Audi Q5 (V6T supercharged)
- 2014-2017 Audi SQ5 (V6T supercharged)
For vehicles equipped with Audi Drive Select (ADS); you will have to order an Additional oil cooler for ADS.
ADS cooler is visible through the top right corner of grille. Usually comes on cars with Dynamic Steering and Dynamic Suspension.
Install Guide: Here