Get up-to-date information on weekly flyer features, Rollback & clearance items, exclusive products, and offers. You can unsubscribe at any time. Personal information provided may be collected, used and disclosed in accordance with ourPrivacy Policy Connect with us on your favourite social networks. We’ll let you know what we’re up to, and you can tell us how we’re doing.Be in the know!
Connect with Us
-
To take off the nozzle, filter, and catch bowl first start off by pushing in the button identified with a red square and twist that part of the device toward the handle portion of the vacuum and it should click and pop off the chassis.
-
-
Once the nozzle, filter and dust bowl have been removed each part can be removed from the nozzle section of the device.
-
-
Remove the three screws.
-
-
Flip the hand vac over and remove two screws.
-
-
Once you have successfully unscrewed the five screws holding the cover on you should be able to take the cover off.
-
Remove the L-shaped plastic hook.
-
Once the L shaped hook has been removed the motor will easily fall out of place.
-
-
Once the motor has been removed from its home the two wires that are giving it power can easily be removed by pulling on them carefully.
-
This will then allow for you to replace the motor.
-
-
Remove the three screws.
-
-
Remove the battery.
-
-
To get to the charging port you will need the plastic opening tool.
-
Remove the three screws on the handle of the vacuum.
-
-
Use a plastic opening tool to separate the two pieces of plastic.
-
-
Remove the plastic covering to the port.
-
Remove the wires to replace the charging port.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.