Instructions
STEP 1: GET MY FREE PAPER FLOWER SVG FILES
First, download my Paper Flower Backdrop design SVG/DXF/PDF files from my free resource library — it's Design #392. The design file includes several flowers and some greenery. You can print the PDFs and cut them by hand, but I strongly recommend using the SVGs with a Cricut.
Since this project is very customizable and takes some planning, think about your goal before starting to cut. What size wall do you want to make? Which flowers do you want to use? Will anyone else help you make the flowers? It's a fun group project!
Each crafter's items will be different, but here are the flowers, their average sizes, and some color options:
Cone Dahlia (15")
Greenery (varies)
Jumbo Broad Dahlia (18.5")
Large Easy Flower (9.5")
Medium Broad Dahlia (8")
Medium Easy Flower (9.25")
Mini Broad Dahlia (4.5" and can be cut on a Joy)
Once you know how large you want your backdrop to
be, consider how many panels you’ll need to create it. I’m making a wall 8' x 8' and I’ve decided to use 30 20" x 16" panels.
Next, how many flowers will you need to cover the panels?
I’ve found that the panels look best with one of the largest flowers as a focal point surrounded by medium and smaller flowers, or with just a mix of medium and small flowers. Greenery looks great on both!
So, I’ll
show you how to estimate how many flowers you’ll need for a similar wall using these three layouts. Again, everyone's flowers and layouts will be different, but once you've watched my process, you'll be able to adjust it to fit your own goal!
To test my three layouts and estimate my flower needs, I cut and assembled:
1 Cone Dahlia
4 Greenery sheets
1 Jumbo Broad Dahlia
4 Large Easy Flowers
1 Medium Broad Dahlia
3 Medium Easy Flowers
8 Mini Broad Dahlias
Let's go over how to cut these on a Cricut using the Large Easy Flower as an example. You can find FREE printable instructions and video tutorials for all the other paper flowers on my tutorials page.
First go to Cricut Design Space and upload the SVG files from the file you downloaded.
If you are not sure how to upload an SVG cut file to Cricut Design Space, watch this helpful video training series I made.
While you can use the Cricut app to make this project, it will be much easier on a desktop computer. If you are on an iPad or iPhone, here is how to download and upload SVG files to the Cricut Design Space app.
Then, add the Large Easy flower SVG to your Canvas.
STEP 2: PREPARE YOUR FLOWER DESIGNS
With your flower on the Canvas, zoom out to see the entire design. This is what my Large Easy Flower looks like in Design Space.
image forthcoming
Cutting more than one flower at once saves time and material, so select the design and click Duplicate to create the quantity of flowers you want. I usually cut a few at a time of each type to keep the pieces
straight.
You can also change their colors by selecting a flower and using the color box at the top menu to adjust
it.
Once you’re happy with the flowers, make sure you have the right machine selected and click "Make It."
STEP 3: CUT YOUR PAPER FLOWERS
If
prompted, click "On Mat," "twelve inch by twelve inch" and "Continue."
If you're using the same paper as I am, change the Material Size to eight and a half by eleven inches".
Then, click "Continue" in the bottom right.
On the next screen, select your material settings. I’ll select “Medium Cardstock - eighty pound” and “More” pressure.
Some machines cut differently, so if you have trouble, try the “Cardstock (for intricate cuts)” material setting.
If you’re using the same materials throughout and the “Remember material settings” box is available, click it to save time. Make sure your Cricut Standard Fine-Point Blade in Clamp B is clean and free of debris.
Place your first mat's cardstock on a green Cricut StandardGrip Machine Mat. Use a brayer to adhere it well. Load the mat and press your machine's Go button.
When the cut is finished, unload the mat, flip
it over and roll it back to release the cardstock. Cut the rest of the mats using the colors on the screen for reference.
STEP 4: ASSEMBLE THE PAPER FLOWERS
For detailed assembly instructions, visit the original paper flower tutorials for each flower.
To make the greenery, fold each leaf in half to form a crease along the length. Curl the edges and tips
with your fingers or bone folder to make a more realistic leaf
shape.
STEP 5: PREPARE THE FOAM PANEL BACKING
If you plan to hang your panels on a wall, you can prep them in advance all at once or one at a time. If you’re putting your panels on a frame, skip this step.
Place one 16" x 20" panel face down on your work surface and have four Command Strips ready.
Take the protective backing off of a strip and stick it on a corner. Repeat for the other corners.
Leave the exterior backing in place to protect the sticky surface.
STEP 6: TEST YOUR PAPER FLOWER LAYOUTS
Now,
the fun part: flower arranging! Since everyone’s flowers and layouts will be different, you might need different quantities then my versions, but this is a good place to start!
I’m making them on small 20" x 16" panels because they’re much easier to transport and store this way.
To make a test layout, place your foam panel on the work surface and set the large flower so that most of the base touches the panel. Then add some a few large, medium, and small flowers to fill in
around the focal point. Remember, the panels will be attached to each other, so you can add small flowers and greenery during the installation to cover the edges.
Whenever you have a layout you like, take a picture and make a few notes on how many of each flower you used. It's a good idea to rearrange your flowers a few times in case you find a combination you like more.
Repeat for the second large flower test and then for the layout without a focal flower.
Once you've recorded your layout ideas, pick one to assemble as an example. Place the flowers back on the panel, and add a 3-M Command strip for posters with the protective film removed to their backs one at a time, gently pressing them back in place. The larger flowers may take more than one strip.
I’ll show you how to attach the panels to
each other in a bit. Remember, if you can see the panel around the edges, it’s ok. I recommend cutting and assembling extra of the small flowers and greenery to cover the edges and seams while you hang the finished panels to make your backdrop.
STEP 7: PLAN OUT AND ASSEMBLE YOUR BACKDROP
After you have created a version of each panel layout you’d like, plan how many of each type you want to have in your wall.
I decided to put a big flower on every other panel, and I want more jumbo dahlias than cone versions. So, I knew I needed enough flowers for ten versions of the jumbo panel, five of the cone version, and fifteen panels without a focal flower.
Then, I made a list of how many of each flower was on each test panel type and multiplied it by the number I wanted of each layout.
Then, we made a lot of flowers. I decided to decorate and assemble the panels all at once, but you can also put them together one at at time, however works best for you.
To decorate them in the way I did, lay out your panels face down on a clean floor in the dimensions you want to cover.
I needed a system to keep everything straight, so I thought of the wall like a spreadsheet. Five columns and six rows of 16" x 20" panels will cover eight square feet. So, A1 will be the top left panel and E6 will be bottom right. I made a simple label for each panel.
Then, lay the flowers on the panels roughly following your notes. I started with the biggest flowers and then continued down in size. It’s ok if some seams and edges show right now, just hold back some
small flowers and greenery to fill them in after the wall is up.
When you're happy with the placements, flip each panel over in place and attach the flowers to each panel with the 3M Command Strips for posters.
STEP 8: PLAN YOUR WALL FRAME
Now that we have all of the flowers on panels, it's time to turn these into a wall. As I said before, you can just put these panels right onto a wall or another solid surface using the 3M Command Strips for Picture Hanging, but what if you need a freestanding wall for a special event?
To have your wall be freestanding and stable, you need to create a frame. There are two good ways to make a backdrop frame -- you can build one from PVC pipes or you can build one from wood. The PVC pipe one is okay, but nowhere near as heavy duty as the wood one. If you only need a backdrop frame for a few uses, PVC is fine. But if you plan to re-use this backdrop frame over and over, or maybe let others use it or even rent it out, you'll probably want the more stable wood version.
I enlisted Greg's help to come up with a design for a stable wood backdrop frame that anyone with some basic tools could make, wouldn't cost too much, would breakdown to fit in a vehicle, and be re-usable over and over.
You can learn exactly how to make either the PVC backdrop frame or the wood backdrop frame in the full tutorial. It's a bit too much to cover all in one project!
STEP 9: HANG YOUR PAPER FLOWER BACKDROP
Once you have your backdrop frame up, it's time to hang the foam panels from it. If you're doing a partial flower wall with a curtain, put the curtain up before you begin this next step. You may need clamps to attach your curtain.
I'm going to put our panels up one by one, starting with the top row. For this, we need some over the door hooks or hangers, pliers, a roll of clear packing tape, about a dozen landscape stakes -- mine are bamboo -- and a stepstool.
To begin, add hooks to the top of your tow row of panels. If you're using a hanger, just break or snap off the arms with pliers. If you're using hooks, straighten the end that doesn't go over the door -- it doesn't have to be perfectly straight, just straight enough that you can tape it onto the back top end of one of your top row panels, like this. I prefer hangers, so I'm putting two hangers
on either end of the upper edge of each top panel so that only the hook part extends beyond the end of the
panel.
Now my backdrop frame is turned around so we're looking at it from the back -- I recommend you set your frame up where it's going to stay, and then walk around and work from the back to hang all of your panels.
Hang the top row of panels in order from A1 to A5 across the top of the frame. Since I want A1 to be in the top left when people look at the wall from the front, it will be in the top right when viewed from the back.
Then we tape each panel together with clear packing tape. I recommend you use clear tape, rather than something like duct tape, because it'll be easier to cut apart later when you take this down. Now be aware that some of your flowers are overlapping the panels in the front, so be sure you shift the panels together properly before taping them as close together as you can.
Once you have the top row done, start on the next row, taping each panel to the one above and the one beside it.
Continue taping until all panels are together.
Now tape alone is stable, but not very rigid. If you are setting this up outside or anywhere there's a breeze, your flower wall may move on you. You don't want that. So to keep it rigid and stable, I'm simply taping landscape stakes to the back along each row and column using the same clear packing tape. It's strong, inexpensive, and easy to remove later on.
STEP 10: ENJOY YOUR FLOWER BACKDROP
Isn't this beautiful? And this is really stable -- it won't fall over. If you want, stake it down outside or put sandbags on the legs for extra stability, but I don't think it's necessary unless you have a really uneven surface to work with.
So in the end, our paper flower backdrop took about 285 paper flowers of different sizes and colors, plus a bunch of greenery. We used over 1,100 sheets of cardstock to make all of these flowers! It was a lot of work, but SO worth it. I can’t wait to use this wall as a background for photos! You can expect to see this flower wall show up in future projects, too!
If you need to take the wall down, simply cut the tape along the seams in the back. Then place them in storage containers, or tack them in a closet with some paper towels in between them. That will make any dust easier to remove the next time you put it up!
Variations
Decorating just a few panels makes a showstopper of a wall decoration. You can stick them up with the 3M Command Strips for Picture Hanging, just be careful of your paint.
Or if you want to use them in photos but have limited time, place three to five panels together to make a swag in front of a nice curtain. Place more flowers and greenery along the edges to completely cover the foam and make the shape less boxy.