How to remove water filter on frigidaire refrigerator

The water filter housing in your Frigidaire refrigerator model FRS26RLECS has a very easy job, it encases and protects your appliance’s water filter. Although its job is simple, a damaged filter housing can cause two very common malfunctions. The first issue it can lead to is a leak inside your refrigerator, and the second issue is an interruption of water flow to your appliance’s water dispenser. Luckily, replacing the water filter housing is a painless repair that most refrigerator owners can accomplish on their own.

Appliance Repair Safety Tips

  • Start your refrigerator repair by unplugging your appliance and turning it water supply off.
  • As you replace the malfunctioning component inside your refrigerator, we suggest you wear work gloves and safety goggles to protect your hands and eyes.
  • If you are unable to safely complete the repair, please stop what you’re doing and contact a refrigerator repair technician to finish the replacement process.

How to Replace the Water Filter Housing in Your Frigidaire Refrigerator

  1. Open your refrigerator’s fresh food compartment door. Locate the water filter housing in the top right corner of the compartment.
  2. Using a quarter-inch nut driver, remove the screw that secures the plastic cover surrounding the water filter housing, and then take the cover out of the refrigerator.
  3. Unthread the two screws holding the water filter housing to the refrigerator’s back wall. After the screws are out, use a flathead screwdriver to gently pry the water couplets up and off the filter housing. Then, remove the housing from the refrigerator.
  4. Take off the water filter cover by rotating it counterclockwise. Next, pull the water filter out of the housing.
  5. This is a great time to replace the old water filter with a new filter. Now insert the old or new filter into the new housing. Once the water filter is in place, replace the top of the housing by twisting it in a clockwise rotation.
  6. Reinstall the water filter and housing by reconnecting the water lines to the top of the housing. Then, secure the housing to the back of the wall by replacing the two screws you took out earlier.
  7. Realign the housing’s plastic cover, and then tighten the screw that secures it.
  8. Close the refrigerator door and enjoy your new water filter housing.

If the water filter housing isn’t the cause of your refrigerator’s leak or the dispenser’s inability to dispense water, please contact us today, and we’ll be happy to help your figure the issue behind your appliance’s malfunction.

    • On the right inner side of the fridge, you will find the model number.

    • Identifying the correct model number will ensure the proper purchase of the new water filter.

  • How to remove water filter on frigidaire refrigerator

    • Click options on the control panel on the front of the left door.

    • Here it will say ice maker is on, click the minus button to turn it off.

    • You will hear a beeping sound to ensure that the ice maker is turned off.

    • The water filter is in the upper right corner of the fridge.

    • To remove the water filter turn it to the right until you feel it detach.

    • Then pull the filter straight out slowly from its slot.

    • Water may drip from the filter upon removal. Putting a towel underneath and removing products from that area will ensure an easy clean-up.

    • Once the filter is removed, identify the model number on it.

    • The model number will ensure you buy the correct replacement at the store.

    • Upon getting the new filter from the store install it into the fridge.

    • Insert the filter straight into its designated slot.

    • Twist the filter to the right until you feel and hear it click into place.

    • To turn the icemaker back on click the options button and hit the minus button, it will beep indicating it is back on.

    • To reset the water filter you hit the down arrow button beneath the options button and go down to "water filter".

    • Press and hold the set button above the minus button on the right side, it will then say "good" next to the water filter.

    • Press options again to return to the main screen.

  • How do I get my stuck water filter out of refrigerator?

    If the water filter is stuck.
    Place a piece of cloth over the water filter cap (this will help protect the cap from becoming damaged).
    Using standard pliers, lock onto the water filter cap and turn the cap a quarter turn. ... .
    Pull the water filter straight out..

    How do you remove a Frigidaire Puresource filter?

    Simply push and then pull on the existing water filter to remove it. Remove the protective caps from your new water filter. Slide filter into place, and push until it locks. Run your water for about 3 minutes until it's primed and ready to go.