How to use 4x4 on jeep cherokee

The Jeep Grand Cherokee , Cherokee , Compass, and Renegade all have Full Time 4×4 System. To put these vehicles into 4 Wheel Drive Low, shift into Neutral, press the 4wd Low button, and then shift to Drive.

Also know, is my Jeep Cherokee always in 4 wheel drive? The Jeep Grand Cherokee is always in 4WD! It´s completely normal when we have some doubts about a car, especially when automotive technology advances so fast. … To clarify, this change allows the on-board computer to automatically take control of the 4×4 traction system.

Moreover, how do you turn on 4 wheel drive in a Jeep Cherokee 2019?

Amazingly, how do you shift a jeep into 4 wheel drive?

You asked, how does Jeep Cherokee 4WD work? The 4×4 system features a massive mechanical wet clutch and electronic limited slip differential in the rear, which allows 100% of the drive torque to be sent to one rear wheel. Managing of torque split and suspension damping is accomplished with a dial on the five-mode Selec-Track® System.

Contents

• How do I know if my Jeep is 4 wheel drive?
• How do I put my Jeep Cherokee in snow mode?
• Are all Jeep Cherokees all wheel drive?
• What is the difference between AWD and 4WD?
• When should I put my Jeep in 4 wheel drive?
• Can you switch from 2H to 4H while driving?
• Is it bad to drive in 4X4 on the highway?
• Is the Jeep Cherokee good in snow?
• What does snow mode do on a Jeep Cherokee?
• What helps jeep drivers avoid obstacles?

How do I know if my Jeep is 4 wheel drive?

If the engine is transversely mounted and you have front and rear drive axles, you have an all-wheel drive vehicle. If the engine is longitudinally mounted and you have front and rear axles, you have a four-wheel drive vehicle.

How do I put my Jeep Cherokee in snow mode?

Are all Jeep Cherokees all wheel drive?

Most Cherokees come with standard front-wheel drive and offer four-wheel drive as an option. The exception is the Trailhawk, which has standard four-wheel drive. The entry-level Latitude trim offers a basic yet comfortable package that comes with: 2.4-liter four-cylinder engine (180 horsepower and 171 lb-ft of torque)

What is the difference between AWD and 4WD?

What’s the difference between AWD and 4WD? There is very little difference in the mechanicals of all- and four-wheel drive. All-wheel drive describes vehicles that have a four-wheel drive system designed to maximise road traction, for example on slippery roads.

When should I put my Jeep in 4 wheel drive?

This position is used for when you need maximum traction and maximum power at slower speeds such as rocky surfaces, deep mud or snow, steep or sharp inclines/declines, etc.

Can you switch from 2H to 4H while driving?

The best part of it all is, you can switch 4WD modes between 2H and 4H and while driving without any risks of speeds below 60mph/100km/h. You could drive it in 2H with only the rear wheels propelling the vehicle forward or when traction gets a bit “iffy” you just pop it into 4H – no problem at all.

Is it bad to drive in 4X4 on the highway?

Or is driving in 4WD mode on a highway safe? The short answer is: Yes, it can be safe to drive in 4WD on the highway as long as you’re going very slowly and so does the rest of the traffic around you. In other words, only during severe road conditions that require you to.

Is the Jeep Cherokee good in snow?

The new Jeep Cherokee offers best-in-class all-weather capability that makes this the right Jeep SUV for snowy and icy conditions. … Plus, the available Jeep Selec-Terrain® Traction Management System comes with five modes to enhance vehicle stability — Auto, Sport, Snow, Sand/Mud and available Rock.

What does snow mode do on a Jeep Cherokee?

With snow mode, you get the ultimate in traction on the slipperiest of surfaces with equal torque distribution to all four wheels.

What helps jeep drivers avoid obstacles?

1. TRACTION. Jeep® Brand Trail Rated® 4×4 vehicles have the traction to handle some of the harshest, most unpredictable driving conditions.
2. MANEUVERABILITY. Swiftly dodge obstacles on the trail, veer around narrow gaps or safely navigate around an accident.
3. GROUND CLEARANCE.

Grand Cherokee is a reliable mid-size SUV from Jeep. And while most SUVs come with body-on-frame construction, this SUV has a unibody chassis. This means that its body, chassis, and floor plan form a single unit. This design makes the Grand Cherokee more rigid and lighter than other SUVs.

The good thing about the Grand Cherokees is that they can easily tackle any type of road condition. That is because they have a reliable 4WD fitted with a powerful engine.

But one of the most common questions that baffle many new owners is how to put the Grand Cherokee in 4WD? After all, to take advantage of the full power of the Grand Cherokee, which is known to be one of the most powerful off-roaders in the market, you should know how to bring it to 4-wheel drive.

So today, we’ll show you how to put this jeep in 4WD and how to disengage the 4WD system.

How Many 4×4 Systems Does a Jeep Grand Cherokee Have?

The Grand Cherokees come with four 4×4 systems that are designed to tackle lots of terrain and weather conditions. These systems provide better grip traction and performance in different conditions, be it icy, snowy, or rocky.

Before purchasing a Grand Cherokee, find out the right 4WD system for your region. Remember, this jeep isn’t economical when it comes to fuel and maintenance. And buying the right system for your region can help you lower your fuel expense. 

These 4×4 systems are:

Quadra-Drive 2 4WD System

This 4X4 system comes with a rear electric limited-slip differential that makes off-roading fun. The Quadra-Drive 2 is a full-time system that provides 100% torque to the wheel that needs it the most. Plus, you can choose from its five driving modes for different environments. These modes include rock, sand/mud, snow, sport, and auto. Some of its extra features are:

• Neutral-mode capability
• Active electronic-transfer case
• Fully auto high range

Quadra-Trac 1 4WD System

This system is used in a wide range of full-time 4WD cars, including some Grand Cherokees. And that is because it uses the full-time high-range mode. With Quadra-Trac 1, the driver doesn’t have to do anything regarding traction distribution on any road. This system has a center differential that splits power between the rear and front axles.

Quadra-Trac 2 System

The Quadra-Trac 2 works with the brake-traction control system and the brake lock differential. This system comes in handy when extra traction is required. It works by transferring torque to the axle that needs it the most.

Quadra-Trac SRT System

This system features a rear electric limited-slip differential and a substantial mechanical wet clutch. The Quadra-Trac SRT allows the car to transfer about 100% of torque to the rear axle. This system features:

• Select-Track system with six driving modes including custom, tow, snow, auto, sport, and track.
• Brake lock differential
• Single-speed transfer case

Jeeps with Quadra-Trac 1 systems come with high-range and single-speed only transfer cases. These systems provide a convenient full-time 4×4 experience without the driver’s interaction. Basically, with this system, you will never have to start the 4WD function.

The brake-traction control (BTC) system used by this system features traction control and standard ABS. The BTC provides resistance to the wheels with less traction while transferring torque to the other wheels. This will make it possible for your car to drive through slippery surfaces with ease.

Grand Cherokee Quadra-Trac 2 – How to Shift 4WD Mode

If your car is equipped with Quadra-Trac 2 systems, then it’s fully automatic in the standard 4WD auto-mode. And when extra traction is needed, the 4WD low position is used. The 4WD low position is designed to tackle slippery, loose roads only.

Note that using the 4WD low position on hard and dry surfaces can damage its driveline components while increasing tire wear. When operating your jeep in this mode, you should never exceed 40 km/h or 25 mph.

The neutral position disengages both driveshafts from the powertrain. The 4WD low position should be used when flat towing behind another car.

When shifting from a 4WD drive high to a low position, you should reduce the car’s speed to less than 3 mph or 5 km/h. With the engine running or ignition button on, switch the transmission gear from drive (D) to neutral (N), and then press the 4WD-low button. Once pressed, the 4WD-low indicator on the dashboard will start flashing and remain solid when you finish shifting. Once the shifting is finished, you can switch back to drive and continue driving.

To shift back to 4WD-high, reduce the car’s speed to below 3 mph, and with the engine still running, shift the car’s gear to “N” and press the 4WD-low button. The 4WD indicator light will start flashing and go out once the shift is complete. Once it’s finished, you can switch the car back to drive and continue driving.

How to Disengage the 4WD Function?

Besides knowing how to put your car in 4WD, you should also learn how to disengage the 4×4. To get the jeep out of 4WD, you should stop the car and put its gear in neutral. With your foot still on the brake pedal, move the 4X4 shift-selector from 2H to 4H. And then move the gear from neutral to drive, and you are good to go.

Also find out how to switch to 4WD in a Jeep Wrangler.

Final Thoughts

The Grand Cherokee is one of the most powerful and reliable SUVs in the market. Thanks to its unique 4WD systems, this jeep can easily handle slippery roads. Each Grand Cherokee 4X4 system has its unique capabilities of tackling specific types of terrains. Therefore, the kind of system you select will be determined by the terrain you plan on exploring. And with some jeeps being full-time 4×4, putting them in 4WD can be pretty straightforward. Changing the 4WD mode is also fairly easy on models that need intervention from the driver, but remember to follow the guidelines to ensure you get the most out of your 4WD vehicle.