Hyper tough solar led security light 1500 lumens manual

This Hyper Tough 5000 Lumen Motion Sensor Solar Street Light was designed for a wide range of lighting applications such as commercial and industrial buildings, parking lots, streets, parks and more. This solar security light is a DIY option and mimics the style of a real street light, is easily mountable and is basically maintenance-free. The advanced solar technology charges in the sun all day, so the solar street light will be ready to illuminate to 5000 lumens at night. The solar security light stays activated for 30 seconds after the last motion is detected before turning off. The Hyper Tough 5000 Lumen Motion Sensor Solar Street Light detects motion up to 26 feet away. Secure your home, business, or any large parameter with The Hyper Tough 5000 Lumen Motion Sensor Solar Street Light. Color: Clear.

Ships from and sold by

walmart.com

Hyper tough solar led security light 1500 lumens manual

This Hyper Tough 5000 Lumen Motion Sensor Solar Street Light was designed for a wide range of lighting applications such as commercial and industrial buildings, parking lots, streets, parks and more. This solar security light is a DIY option and mimics the style of a real street light, is easily mountable and is basically maintenance-free. The advanced solar technology charges in the sun all day, so the solar street light will be ready to illuminate to 5000 lumens at night. The solar security li

This Hyper Tough 5000 Lumen Motion Sensor Solar Street Light was designed for a wide range of lighting applications such as commercial and industrial buildings, parking lots, streets, parks and more. This solar security light is a DIY option and mimics the style of a real street light, is easily mountable and is basically maintenance-free. The advanced solar technology charges in the sun all day, so the solar street light will be ready to illuminate to 5000 lumens at night. The solar security li

FOR FIRST TIME USE: SOLAR LIGHT NEEDS TO CHARGE IN FULL SUNLIGHT FOR 8 -12 HOURS WITH THE SWITCH IN

THE "ON" POSITION TO FULLY CHARGE THE RECHARGEABLE BATTERY.

IF INSTALLING MORE THAN 1 LIGHT, YOU MUST LINK YOUR LIGHTS FIRST BEFORE INSTALLATION BEGINS. YOU MAY

LINK UP TO 20 LIGHTS. AFTER THE LIGHTS ARE LINKED YOU MAY BEGIN THE INSTALLATION PROCESS.

The intelligent solar LED motion activated light measures the corresponding available battery power through the current voltage point of

the battery, adjusts the energy and lumen output, and maximizes the lighting time.

Tools Required

Pencil

Phillips-head

Screwdriver

1

Marking the location

Mark the location where you want to mount the light xture (Part C) .

Measure the width of two holes on the back of the solar fence

light to align holes for the 2 screws (Part A) on the surface. The

distance between the two holes is 4.7in. (120mm).

Drill two holes.

2

Mounting the light

wall anchors

Part

Insert the

(

Part

Insert the screws (

A) and leave at least 1/4in. (6.3mm) of the

Part

screws (

A) outside of the surface for holding the solar fence light.

Mount the light on the screws (

on the back of the light over the screw heads.

TROUBLE SHOOTING

If light does not turn on, remove battery,

wipe both ends with a clean, dry cloth

and reinstall battery. Check the battery

to ensure that it is making secure

contact with the terminals.

If this does not work, replace with a

new battery.

WARNING:

Do not dispose of lithium batteries in municipal waste stream or by re as batteries may explode. Do not open, short circuit, or destroy

batteries. Dispose of batteries in accordance with Local, State, and Federal regulations. Do not mix old and new batteries. Do not mix alkaline,

standard (carbon-zinc), or rechargeable (nickel cadmium, nickel metal hydride or lithium ion) batteries .

©

Wal-Mart Stores, Inc.

Hyper Tough is a registered trademark of

Wal-Mart Stores, Inc. All Rights Reserved.

Distributed by/Distribuido por

Wal-Mart Stores, Inc.,

Bentonville, AR

MADE IN COUNTRY/HECHO EN COUNTRY

TM

Electric drill

drill bit size:

ø7.5mm (3/10 in.)

B) so they are ush with the surface.

Part

A) by placing the keyholes

Slide the power switch to the "OFF" position. Use a

Phillips head screwdriver to remove 7 screws

from the light. Set 7 screws to the side. Remove

old battery and replace with a new 3.7V, 2000 mAh lithium

(18650) rechargeable battery. Replace the battery

cover by aligning it properly and replacing it with

7 screws removed earlier. Slide the power

switch to the "ON" position.

For optimum performance, allow light xture to charge

in full sunlight for 8-12 hours.

For assistance with assembly or instruction, parts and customer service, call: U.S.A. & Canada only: 1-844-551-0680

8am – 5pm Monday – Friday, Central Standard Time Or email:

INSTRUCTIONS

INSTALLATION

Hardware Included

(A)

Screw X 2

Parts

A

B

REPLACING THE BATTERY

LINKABLE SOLAR LED FENCE LIGHT

ITEM: Q01DA0429-08

(B)

Wall Anchor X 2

(C)

Light Fixture X 1

4.7in.

x

x

C

Screws

Power Switch

Battery

A

Battery Cover

10/22/2019

E

How do you change the mode on a solar light?

The default setting is 'Light Mode 1 - Alternating' when the lights first come on. Press the 'Mode' button again to switch to 'Light Mode 2', press it again for 'Light Mode 3' and so on to cycle through the 6 Lighting Modes available. The seventh press of the 'Mode' button will turn the lights off completely.

Why is my LED security light not working?

Reasons often include a faulty power supply, loose connections, a faulty circuit design, or even damage due to water ingress caused by rain. Whatever the reason is for your LED lights not working and whatever the tell-tale signs are, there's usually a solution to the issue.

Why are my solar path lights not working?

In most instances of solar powered lights not working, it is the batteries at fault. Either they are not receiving charge or they are not holding it. If the lights work using normal batteries then it is clear that the problem is with either the rechargeable batteries or the solar panel.