The new iPhone 13 lineup is available and it features a design quite similar to the iPhone 12. However, there is one small change the means your iPhone 12 cases won’t fit your new precious. 9to5Mac made some calculations as to the similarities and the differences in measurements of the two iPhone lineups. Here’s what they found. The dimensions are the same between the iPhone 13 Pro and iPhone 13 : And here are the dimensions of the iPhone 12 and iPhone 12 Pro: While the measurements above are close to identical, the camera bump on the back of the iPhone 13 has been redesigned and is larger on the iPhone 13. This means that the iPhone 12 cases will not fit your new iPhone 13 handset. There is a similar issue with the iPhone 12 mini and iPhone 13 mini. Again, changes in the camera capabilities and their accompanying bump cause the cases designed for the iPhone 12 mini to
not fit the iPhone 13 mini. iPhone 12 mini dimensions: iPhone 13 mini dimensions: It’s the same story with the iPhone 13 Pro Max and iPhone 12 Pro Max. Because of changes to the camera bump design, iPhone 12 Pro Max cases will not fit the iPhone 13 Pro Max. iPhone 12 Pro Max
dimensions: iPhone 13 Pro Max dimensions: These minor changes all mean that your iPhone 12 cases will not fit your new iPhone 13. Luckily, between Apple’s first-party cases and the options offered by third-party case makers. Next Up
Apple to Require COVID Testing for Employees Starting Next Month – No Vaccine Requirement Yet Posted byu/[deleted]6 months ago  Basically as the title says, I want to buy the mous intralock phone case but they only do it for the 13 pro max not 12 pro max and I’m not sure if it would fit my phone is anyone aware if they would? level 1 It would be a little tiny bit loose as the 13 pro max is slightly thicker and you might have a small gap around the square camera housing. level 2 Damn will have to look for another option, thank you for the reply level 1 I have two 13 Pro Max cases for my 12 Pro Max. The only difference is the hole for the camera is slightly wider on the newer phone. Overall fit as far as I can tell is the same. Not sure how it might go with the intralock but with a uag and tech21 case it’s good for me. Innovative A large iPhone is available for 2021, and it comes with a different camera bump. Does this affect the case sizes? With a new large-sized iPhone coming along with it, there are a whole host of new cases, and for good reason: a large glass iPhone will likely need a lot of protection for life. If you’re considering spending the sizable dollar amount on an iPhone 13 Pro Max, protecting it is probably a consideration, but saving money too, which can lead you to an obvious question: can you save some cash by getting one of the iPhone 12s of the last year? Pro Max cases? After all, they look the same, with similar stainless steel edging, glass front and back, and an aesthetic that comes pretty close. Can you just save money and get a case from last year’s 12 Pro Max that has now been replaced? Does an iPhone 13 Pro Max case fit an iPhone 12 Pro Max?The answer to this question is mixed. Tech-wise, an iPhone 13 Pro Max fits into a 12 Pro Max case, but it’s not a great fit, so to speak. While Apple has moved some of the buttons slightly, the cases are mostly lined up next to each other. The camera bump is in the way, however, and here’s why: the 12 Pro Max had a smaller camera bump than the 13 Pro Max, and therefore the camera cutouts on the housings were also smaller. Because of that size difference, having a smaller cutout for the camera in a 12 Pro Max case means the new model, the 13 Pro Max, doesn’t have that much room to support its bump and means some of it could fit, but the Rest maybe not. We found that the fit of the iPhone 13 Pro Max was pretty tight, but a little too tight at the point where it wasn’t easy to remove the phone. It didn’t help that the phone didn’t fully fit in every 12 Pro Max case, thanks in part to the camera bump. It is noteworthy that the durability of the case can also decrease as the fit is not perfect. Part of what gives your phone solid protection in a case is this design. If the design is not entirely right, you may not get the same result if you fall or fall. Cases can have reinforced corners or a material design that is specifically designed to hug and hold a phone. While a 12 Pro Max case will technically fit inside the 13 Pro Max, that imperfect fit can mean your new phone isn’t as protected as you might think. Does an iPhone 12 Pro Max fit in an iPhone 13 Pro Max case?However, the other way is a little easier. While the protection of the iPhone 12 Pro Max may struggle to get onto the iPhone 13 Pro Max due to this huge camera bump, a case for the 2021 phone will fit the 2020 model. Yes, an iPhone 13 Pro Max case will fit the 12 Pro Max just fine, and while the buttons aren’t perfectly coordinated, they’re not so far away that it’s an issue, not like an iPhone 13 case on an iPhone 12. If you have one of last year’s phones, you can actually get a case from one of this year’s models and you’ll be fine. Source link Does iPhone 12 Pro Max cases fit 13 Pro Max?Technically, an iPhone 13 Pro Max can fit into a 12 Pro Max case, but it's not an amazing fit, so to speak. While Apple has moved some of the buttons ever so slightly, the cases mostly line-up.
Are 12 and 13 Pro Max same case?Apple has again changed the size of the camera module on the iPhone 13 Pro and iPhone 13 Pro Max. The camera bumps on the 13 are a few millimeters wider and taller than on the previous iPhone 12 Pro and iPhone 12 Pro Max. The result is that your old case won't fit on these new smartphones.
Are the iPhone 12 Pro Max and 13 Pro Max the same size?They have almost the same dimensions, but the iPhone 13 Pro Max is slightly thicker by an almost unnoticeable 0.3mm. The dimensions of the iPhone 13 Pro Max are 160.8 x 78.1 x 7.7 mm (6.33 x 3.07 x 0.30 in). The dimensions of the iPhone 12 Pro Max are 160.8 x 78.1 x 7.4 mm (6.33 x 3.07 x 0.29 in).
|
12 pro max and 13 pro max case size
Related Posts
Copyright © 2024 en.idkuu.com Inc.
