Before we start, there are some conditions that must be met in order to use the WPS push button method: Show
The blue Wi-Fi lamp on the printer will continue flash while searching for, or connecting to the access point. During the setup the green power lamp will also start to flash. When the printer has successfully made a connection to your wireless network, the blue and green lamps will stop flashing and remain lit. To confirm that your printer is successfully connected to your wireless network, you can print out the network settings of your printer if you wish:
When referring to the printout, check that the “Connection” indicates “Active” and that the SSID -Service Set Identifier (or the name of your wireless network) indicates the correct name of your wireless network.
Please now proceed by installing the software to make the most out of your PIXMA MG2940. If you do not have the installation CD that came with your product, please download the manuals and software. If the wireless setup is still failing after following this guide, please contact us for further assistance. The printer has a function to connect a computer or smartphone to the printer directly via wireless LAN, allowing you to perform printing operation. Follow the procedure below to use this function. For more on printing operation, refer to device's or application's instruction manual. Important
Changing Printer SettingChange the printer setting following the procedure below.
Connecting Device to PrinterImportant
|