Show
This familiar Charter design provides full command of your Charter Cable service in addition to universal control of TVs, Blu-ray/DVR players, VCRs, and surround sound audio systems. ↓
FeaturesFull Universal ControlThis remote features full universal control of your home theater including the cable box, TV, DVD/Blu-ray player, and audio device. Master Power KeyThe Master Power key offers the ability to turn-on or off all devices that you use to watch cable television in a single keypress. Volume LockThis feature allows you to lock the volume and mute functions to your TV or Audio Device. SetupStep 1: CodeFinderStep 2: Setup Instructions
Turn on your equipment and follow the steps below to set up your remote.Be sure to point the remote at your equipment during setup. Step 1: Press the mode key for the device type you wish to setup. Step 2: Press and hold SETUP until the mode key blinks twice. Step 3: Using the digit keys on the remote, enter the code shown in the CodeFinder on this web page. Step 4: Test the remote to confirm that it controls your device as expected. If it does not, try again using the next code listed.
Step 1: Press the mode key for the device type you wish to setup. Step 2: Press and hold SETUP until the mode key blinks twice. Step 3: Enter 9 – 9 – 1 using the digit keys on the remote. Step 4: Press 1 for a TV code, 2 for a DVD/VCR code, or 3 if searching for an audio device code. Step 5: Aim the remote at your equipment and press CH+ repeatedly until the device turns off. Step 6: Press and hold SETUP until the mode key blinks twice. Your new setting is saved.
Follow the instructions. Step 1: Press and hold SETUP until the mode key blinks twice. Step 2: Enter 9 – 9 – 3 using the digit keys on the remote. Step 3: Press the mode key for the device you wish to use for volume control. The key will blink twice to confirm. FunctionsRemote FunctionsPOWER/SETUP/MODE KEYS
NAVIGATION KEYS
PLAYBACK CONTROLS
OTHER KEYS
FAQFrequently Asked QuestionsThis remote comes with VOLUME LOCK defaulted to control volume using your TV. To change VOLUME LOCK to another device, follow the VOLUME LOCK programming instructions in the SETUP section of this site. This remote uses AA size batteries. While Heavy Duty batteries will work, alkaline batteries are recommended and will have much longer battery life. Five blinks means that your batteries are low and need to be replaced soon. To control your equipment, be sure to do the following:
Follow the programming instructions for SYSTEM POWER in the SETUP section of this site. Universal Electronics, Inc. 15147 N. Scottsdale Road,
Suite H300 How do I program my charter spectrum remote?Programming Your Remote. Turn on the TV you want to program.. Press and hold the Menu + OK buttons simultaneously until the Input button blinks twice.. Press TV Power. The Input button should light up solid.. Aim the remote at your TV and press and hold the UP arrow.. Once the device turns off, release the UP arrow.. How do I program my remote to my TV?Auto-programming. Power on the TV or other device you'd like to connect to.. Insert batteries into your remote and point at the device.. Press and release the correct device button on your remote for the device you're connecting. ... . Now press the power button and the device button simultaneously.. |