L hv 46 hydraulic oil

General features Hydrol L-HV hydraulic oils are manufactured basing on high quality base oils and a set of enriching additives. They are featured by high level of antiwear properties and additionally improved temperature depending viscosity grades compared to L-HM hydraulic oils.It provides: - extended life time,- reduction of wear of hydraulic pumps elements,- work at wide range of temperatures with perfect viscosity preserved (high viscosity grade: WL > 140). Application Hydrol L-HV hydraulic oils are intended for high loaded powering systems of high pressure piston pumps with constant and variable delivery and for sliding-vane pumps, where high antiwear oil properties are required and for precise systems of hydraulic control and hydraulic systems which require insignificant viscosity changes with temperature changes. Standards, approvals, specifications DIN 51524 part 3 HVLPISO 6743-4 Hydrol L-HV 32, 46, 100 - Eaton Vickers I-286 S  Hydrol L-HV 15, 32 - TATRA Hydrol L-HV 46: Admission Lena Wilków - Vehicle RDPN-1800 type, version P Hydrol L-HV 46: MISTA Sp. z o.o. - RD130, RD165C, RD165H, RD200, RD200H Physical and chemical properties Parameters    Unit  Typical valuesKinematic viscosity at 400Cmm2/s47.2Viscosity index-145Flow temperature0C-34Ignition temperature0C210Resistance to foaming   ·     susceptibility to foaming: foam volume after 5 min. of blowing with air at 250C, ·     foam durability: foam volume after 10 min. standing still at 250C standing still at 250Cml20 0Corrosiveness to copper 3 h/1000C, corrosion ratereference sample1aDeemulsifying properties – emulsion and water separation time to achieve: -     40 - 43 ml of oil -     37 - 40 ml of water -      0 - 3 ml of emulsion atmin.20 0C54Ability to release air at 50°Cmin.6Ability to transfer loads with the FZG, breaking load, minimum-11ATTENTION: Physicochemical parameters listed in the table are typical value

Products specifications

General features Hydrol L-HV hydraulic oils are manufactured basing on high quality base oils and a set of enriching additives. They are featured by high level of antiwear properties and additionally improved temperature depending viscosity grades compared to L-HM hydraulic oils.It provides: - extended life time,- reduction of wear of hydraulic pumps elements,- work at wide range of temperatures with perfect viscosity preserved (high viscosity grade: WL > 140). Application Hydrol L-HV hydraulic oils are intended for high loaded powering systems of high pressure piston pumps with constant and variable delivery and for sliding-vane pumps, where high antiwear oil properties are required and for precise systems of hydraulic control and hydraulic systems which require insignificant viscosity changes with temperature changes. Standards, approvals, specifications DIN 51524 part 3 HVLPISO 6743-4 Hydrol L-HV 32, 46, 100 - Eaton Vickers I-286 S  Hydrol L-HV 15, 32 - TATRA Hydrol L-HV 46: Admission Lena Wilków - Vehicle RDPN-1800 type, version P Hydrol L-HV 46: MISTA Sp. z o.o. - RD130, RD165C, RD165H, RD200, RD200H Physical and chemical properties Parameters    Unit  Typical valuesKinematic viscosity at 400Cmm2/s47.2Viscosity index-145Flow temperature0C-34Ignition temperature0C210Resistance to foaming   ·     susceptibility to foaming: foam volume after 5 min. of blowing with air at 250C, ·     foam durability: foam volume after 10 min. standing still at 250C standing still at 250Cml20 0Corrosiveness to copper 3 h/1000C, corrosion ratereference sample1aDeemulsifying properties – emulsion and water separation time to achieve: -     40 - 43 ml of oil -     37 - 40 ml of water -      0 - 3 ml of emulsion atmin.20 0C54Ability to release air at 50°Cmin.6Ability to transfer loads with the FZG, breaking load, minimum-11ATTENTION: Physicochemical parameters listed in the table are typical value

Products specifications

SINOPEC L-HV low temperature anti-wear hydraulic oil is blended with highly refined base oil wiht high viscosity index and well-chosen special functional additives by internationally advanced process. It is especially suitable for the lubrication of moderate/high pressure system working in conditions of outdoor, severe cold regions and large ambient temperature variation or severe condition. The product comprises several grades such as 15, 22, 32, 46 and 68 according to its kinematic viscosity at 40ºC.

Advantages

♦ With high anti-wear performance as that of L-HM anti-wear hydraulic oil, better high/low temperature performance and demusibility than L-HM, providing outstanding low temperature startup ability, low temperature fluidity and high temperature protection, effectively prolonging service life of oil

♦ Outstanding viscosity-temperature performance, shear and oxidation stabilities, small viscosity variation ensuring more stable work of hydraulic system

♦ Outstanding anti-wear, anti-rust and anti-corrosion performance, prolonging service life of hydraulic equipment

♦ Outstanding adaptability to seals, effectively preventing oil from leaking

Performance

The product meets the following specifications:

♦ GB 11118.1-94(L-HV)

♦ ISO 6743/4 (L-HV)

Applications

♦ Suitable for lubrication of moderate/high pressure system working in conditions of outdoor, severe cold regions and large ambient temperature variation or severe condition, such as hydraulic system of engineering, construction, mining and oil field machineries as well as ships and vehicles

What is HV hydraulic oil?

Is all 46 hydraulic oil the same?

What is HLP 46 hydraulic oil?

What is AW 46 hydraulic oil used for?