Where to buy wood for pyrography

Best Types of Wood For Pyrography & Wood Burning 2022 (And How To Prep It)

Pyrography is the art of burning images into a wood surface. Pyrography has been an art form since ancient times and although tools and materials have changed over time, the basics of pyrography have remained the same.

This traditional art form relies on various types of wood that each have their own strengths and weaknesses that may help or hinder an artists work. It is therefore beneficial for pyrography artists to become familiarized with wood options and the proper way to prepare wood before diving into a new project.

For example, some woods are not only much more difficult to work with, but can also cost you a lot more to purchase, so researching before diving into a new project can save you both time and money.

Below we’ve listed some of the most common and easily workable woods used in pyrography, as well as some more unusual and exotic woods for more advanced artists looking for a challenge. Alongside, we’ve explained the general pros and cons so you know what wood is best for you!

List of Best Pyrography Wood & Wood Burning Woods (Pros & Cons)

Below are some of the most popular woods used for pyrography. They range in price, texture, color, and availability and are sometimes best for practice instead of completed projects.

1) Balsa Wood

10 Pack Balsa Wood Sheets, Natural Unfinished Wood for House Aircraft Ship Boat DIY Wooden Plate Model,...

• Package includes: 10 pieces of light wood board; Dimensions: about 100 x 200 mm / 3.9 x 7.9 inches,...
• Unfinished boards, natural wood color, can be painted, colored, and marked, is one of the essential...
• The surface is smooth and burr-free, easy to grip, and will not cause injury to opponents.

Balsa wood is a very soft wood that is great for beginners to practice on. It is very light in color, has minimal grain, and is inexpensive when compared to other woods listed. This wood can be found at wood suppliers and craft stores that carry wood modeling materials.

Balsa is usually sold in blocks for use in modeling and boards are difficult to find. Pyrography pens tend to gouge and sink into balsa wood because it is so soft, so use caution when burning on this variety and consider using it as strictly a practice wood.

2) Basswood

Basswood is a favorite among seasoned pyrographers because of its light color and minimal grain. Inexpensive basswood can be found at wood stores and craft supply stores in boards of many sizes.

As a softer wood, basswood is easy to work with and a wide range of pyrography techniques can be applied to it with minimal effort. Some artists may find the softness of basswood to be tricky to work with depending on the type of design being created, so keep this in mind when considered basswood for your next project.

3) Beech

Beech is another popular wood for pyrography. It is a very light colored wood but contains dark grains that may ooze sap when being burned. Beech is more affordable than other types of hardwoods such as maple, but it is also harder to find at local retailers and online.

4) Willow

Willow is a soft wood that is easy and smooth to burn. It is almost white in color with a very light grain that is almost invisible! When finishing, willow retains its original color instead of appearing darker. 

The only major downside to willow for wood burning is that it is hard to come by. Wood burning artists who can find willow highly recommend it, so keep an eye out for this highly sought after wood! 

5) Aspen

Aspen is similar to willow in that it is extremely soft and easy to draw on with a pyrography pen. It retains its original color when sealed with a finishing product. 

The one con of aspen is its color variation. Round cuts of aspen will have quite a bit of color throughout the wood grain, so if you are looking for an even surface to work on, consider another wood on this list. 

6) Birch

Birch is another soft wood that is commonly used by wood burning artists. Both light in color and possessing minimal grain, birch is an easy and forgiving wood to work with. It burns like basswood and is readily available at wood supply stores and many craft stores.

Birch is sometimes sold in large sheets of plywood, which makes this an economical choice for pyrographers who want to stock up on wood for many projects. Be aware that birch has a tendency to splinter, so do not burn into it too deeply.

7) Cherry

10 Pack of Thin Brazilian Cherry Wood Boards (Jatoba)

• You are buying a pack of 10 Thin boards from the Cherry tree in Brazil called Jatoba. This species...
• Each board is between 1/16" and 1/8" thick
• Each board is between 5 and 6 inches wide, and they are 16 inches long

A less popular option for wood burning is cherry wood. This wood can be found in most wood supply stores and is a durable hardwood. While beautiful due to its rich coloring, cherry is not uniform in color and is considered a medium to dark variety of wood. This makes it less ideal for light, detailed pyrography designs.

8) Maple

Maple is a light, minimally grained hardwood that is a favorite among pyrography artists. Arguably the best wood choice for wood burning, maple is best burned at high heat because of its hardness. 

It is found in most home improvement stores but is generally more expensive than other options. Maple may not be the best wood for beginners due to its cost, but it is easier to fix mistakes due to its gouge-resistant nature.

9) Pine

Sale

Walnut Hollow Rectangle Pine Wood Plaque, 11" by 14"

• Features a routed, beveled, edge for a finished look; 100% natural unfinished pine, the species most...
• Kiln-dried, smooth-sanded, and free of resin and pitch for a flat, clean, chemical-free wood surface
• Fine, light, even wood grain; ready-to-finish wood canvas surface; ready for paint, stain, vinyl...

White and yellow pine are commonly used for wood burning. Opinions on pine vary, but generally yellow pine is more difficult to work with due to its variations in color. This type of pine is best used for lettering work and not portraits or highly detailed designs.

White pine offers a smoother burn than yellow pine. Both types are light in color, soft, and found in most craft stores but have a tendency to ooze sap when burned.

10) Plywood

Beginner pyrographers often use plywood found at local home improvement stores due to its availability and affordability. While plywood is not the best quality wood, it does have a light and even surface that accommodates many different projects.

Designs made in plywood will age and fade much faster than other varieties and the slivered texture of plywood can make for lower quality burns.

11) Poplar

Poplar is another great option for pyrography. It is light, minimally grained, easy to find in craft stores, and is cheaper than other hardwoods. This wood is great for detailed designs and staining.

Poplar is very similar to maple but much more affordable, making it an ideal wood choice for beginner, intermediate, and experienced wood burners alike! 

One con of poplar is that is it sometimes has sap or resin spots. Buying poplar in person at a physical store can help you determine its quality and avoid this issue. 

12) Studio Wood Panels

Walnut Hollow Value Pack Medium Basswood Country Planks with Live Edge Bark for Woodburning, Home Décor...

• The Width of each of the 6 pieces will vary from 9" to 11"; Length is 13"; Thickness is 5/8"
• Ideal for art, crafts, hobbies, home decor, rustic weddings, parties, table centerpieces, flower or...
• Carefully processed to retain the natural bark; kiln dried and sanded for a smooth, flat, clean,...

Wood panels are ready to use and sold in craft stores. They come in a range of sizes and are light in color with small amounts of grain. Pre-treated wood panels are more convenient to buy and burn than other types of wood, but they are very expensive, so it really depends on your budget and how much you value convenience.

13) Pacific Albus

Pacific albus is a less popular option for pyrography that yields the same results as balsa wood. It is light with minimal grain and is soft in texture. Pacific albus is also very inexpensive.

This wood is great for beginners and even experienced pyrographers who want to practice new techniques. The one major con to pacific albus is it is difficult to find.

14) Jelutong

Jelutong is a wood species native to southeast Asia that is quite rare to find in North America and Europe. Wood burning artists who want to try this wood should check online retailers to have the wood imported. 

While rare, Jelutong is moderately priced and a high quality alternative to more popular wood species. The wood has straight grains and a low density, making it ideal for woodworking, pyrography, and other projects. 

Jelutong is light in color and darkens only slightly with age.  

How to Prepare Wood for Pyrography & Woodburning 

Once you have found the right type of wood for your project, you need to make sure it is correctly prepped. Some wood, such as studio panels, is sold prepped and ready to use. Most wood that you buy from home improvement stores or wood suppliers will need to be prepared at home.

The first step is to sand the wood. Start with a rougher grit sheet of sandpaper and sand with the grain to minimize scratches. As you work, use a damp cloth to wipe away any sawdust. Once you have sanded it down, wet the wood with a sponge until it feels damp to the touch and let it dry completely. Sand the wood once more with 220 grit sandpaper until smooth.

Applying heat to wood releases fumes. Especially when working with plywood and studio wood panels, ensure that you are not burning too deeply and releasing toxic fumes from glue and other chemicals that may be present within the wood. Work in well ventilated areas and use a fan to disperse fumes and keep yourself safe.

What is the best wood to use for pyrography?

What wood is not used for pyrography?

Is plywood good for pyrography?

What materials can be used for pyrography?